Toy water sticker

usage method
1. The model water sticker should first cut the required part from the whole paper and soak it in warm water for about 1 minute.
2. Then try to twist it with your fingers. Make sure that the glue between the surface layer of the plastic film and the backing paper has melted, and take it out of the water after the plastic film can be separated.
3. Place it near the position where the pattern needs to be pasted on the model, and gently slide the plastic film with the pattern from the backing paper to the surface of the model with your fingers. The backing paper can be thrown away.
4. After the pattern position is adjusted accurately, the residual water between the sticker and the model is sucked away with a sanitary swab, and the residual bubbles are extruded at the same time. Then put it in the air to dry, and the plastic water stickers printed with various marks can be firmly adhered to the surface of the model.
Its function is like a mild dissolving agent, which can slightly "dissolve" the water sticker. In this way, the water sticker can be completely and tightly fused with the surface it is attached to. It can stick into the gap, cover the protruding rivet and circle the curve.
Once the softener is applied, be careful not to touch or move the water sticker, otherwise the water sticker may be destroyed. When the water sticker appears to wrinkle, it means that the sticker softener works, but it will shrink and return to flat after drying. If you see a bubble after drying, pierce it and reuse the softener. Although it doesn't work as well as the first time, it will help more or less when it can't be solved.
One thing to keep in mind is that different brands of softeners have different characteristics, and so do water stickers. Therefore, the "strong" softener may destroy the thin water stickers.
So before you don't know a certain brand of water sticker and sticker softener, you'd better try it on the unused water sticker first. When the water sticker is dry, cover it and the model with transparent paint of your choice to make it smoother. With luck, the water sticker will naturally blend with the paint and will not be affected when you start to dry sweep.